22 MPG combined is the number to remember for the 2015 Chrysler 200 AWD with the 3.6L V6. While it’s not going to win any hypermiling competitions, it represents a reasonable compromise for drivers who want the confidence of all-wheel drive, a peppy V6 engine, and a relatively stylish mid-size sedan. This car targets buyers who prioritize confident handling and available power over squeezing every last mile from a gallon of fuel.

City and highway performance

The EPA estimates for the 2015 Chrysler 200 AWD 3.6L break down to 18 MPG in the city and 28 MPG on the highway. The city figure reflects the fuel consumption penalty often associated with all-wheel-drive systems that constantly engage, plus the inherent inefficiency of stop-and-go driving. The highway figure is more respectable, aided by the 9-speed automatic transmission. This complex gearbox allows the engine to cruise at relatively low RPMs, improving fuel economy during long highway trips. However, short trips that don’t allow the transmission to fully use its higher gears, are likely to produce worst case MPG numbers.

Annual fuel cost

According to the EPA, the estimated annual fuel cost for this particular 2015 Chrysler 200 configuration is $2,000. This figure is based on driving 15,000 miles per year and using national average fuel prices for regular unleaded gasoline. Your actual fuel costs may vary depending on how many miles you drive each year, the type of driving you do, and the price of gas in your area. Aggressive driving habits and consistent city driving will easily push the yearly fuel bill above the $2,000 mark. But for anyone who drives a mix of city and highway miles, $2,000 is a good benchmark for estimating the fuel cost of owning this vehicle.

Real-world expectations

While the EPA estimates provide a useful baseline, real-world fuel economy often differs. Factors such as driving style, traffic conditions, and even tire pressure can significantly impact your MPG. Owners of the 2015 Chrysler 200 AWD 3.6L commonly report achieving figures within a few MPG of the EPA estimates, both above and below. Consistent highway driving, with careful throttle inputs, can often result in exceeding the 28 MPG highway rating. Conversely, aggressive acceleration and frequent short trips in urban areas are almost certain to result in lower fuel economy, sometimes dropping below 18 MPG in the city.

How it compares

When considering its competitors, the 2015 Chrysler 200 AWD 3.6L’s fuel economy places it in the middle of the pack among similarly equipped mid-size sedans. The Toyota Camry AWD, for instance, wasn’t available in 2015, meaning that 200 buyers focused less on MPG and more on the features it offered like AWD and a V6. Front-wheel-drive versions of the Camry with their base 2.5L engine achieve better fuel economy, closer to 28 MPG combined. The Nissan Altima 2.5 S achieves approximately 31 MPG combined, and Honda Accord comes in at 30 MPG combined, but neither offer AWD during this model year. For buyers who value all-weather capability and V6 power, the 2015 Chrysler 200 AWD 3.6L offers an acceptable compromise, even if it comes at a slight fuel economy penalty. You can compare this to the 200 MPG across all years to see how it stacks up.

Tips to maximize efficiency

One of the simplest ways to improve fuel economy in the 2015 Chrysler 200 AWD 3.6L is to adopt a smoother driving style. Avoid aggressive acceleration and braking, and try to maintain a consistent speed whenever possible. The 9-speed automatic transmission is designed to shift quickly into higher gears, so resist the urge to bury your foot in the throttle to maintain speed.

Proper tire inflation is another critical factor to consider. Check your tire pressure regularly and inflate your tires to the recommended pressure listed on the sticker inside the driver’s side doorjamb. Underinflated tires increase rolling resistance and reduce fuel economy.

Regular maintenance, including oil changes and air filter replacements, also plays a role in maximizing efficiency. A clean air filter ensures that the engine can “breathe” easily, while fresh oil reduces internal friction. Adhering to the manufacturer’s recommended maintenance schedule will help keep your 200 running efficiently for years to come.

Minimize unnecessary weight in the vehicle. Carrying extra cargo in the trunk or backseat adds to the vehicle’s overall weight, which negatively impacts fuel economy. Remove any items that you don’t need to carry on a regular basis.

Consider the use of fuel additives. While not strictly necessary, some owners have reported slight improvements in fuel economy with the use of fuel additives designed to clean fuel injectors and improve combustion. Research different additives and choose one that is specifically formulated for your vehicle. You can view all Chrysler fuel economy data through the years and how the model has changed.